Axial UMG10 6x6 Upgrade Series - Rear Chassis Brace

Out of the box the UMG10 6x6 has some flaws. One of the flaws is having quite a bit of chassis flex in the rear due to the chassis being a repurposed SCX10II chassis with chassis rail extensions. I've designed a 3D printed chassis brace to stiffen up that rear end.

The 3 minimal braces bracing that rear end together.

Here's my 3D printed brace. It's in 2 pieces for 2 reasons.

1. My printer bed isn't big enough
2. The separated part might need to be removed if I go the divorced axle route to replace that front part with a transfer case.

Given that, the STL file is provided as a single piece, so leave it as one piece if you desire to do so.

*Note: The pictures below are of an older version with the piece separated at the rear. I know have a print with the smaller piece in the front in case I want to replace with a transfer case.